ATS programing on ToCoNet

Demo code

T.B.D.

Hardware: TWE-Lite

• CPU: OpenRISC 1200
• Flash ROM: 160 kB
• SRAM: 32 kB
• EEPROM: 4 kB
• Network: IEEE 802.15.4

You can get it from following (only for Japan).

• TWE-Lite
• TWE-Lite DIP

And also you need following firemware writer.

• TWE-Lite R

Setup environment

Debian GNU/Linux

You need ToCoNet SDK to build this product.

$ wget https://mono-wireless.com/download/SDK/TWESDK_201408-31-2/TWESDK_201408-31_Linux.tar.bz2
$ tar xf TWESDK_201408-31_Linux.tar.bz2
$ export TWESDK=`pwd`/TWESDK

And also need some packages.

$ sudo apt-get install python-serial

Mac OS X

T.B.D.

Windows

T.B.D.

How to build

Simply type "make" on demo directory.

$ git clone https://github.com/fpiot/toconet-ats.git
$ cd toconet-ats/demo/Samp_PingPong/PingPong/Build
$ make
$ ls -l *.bin
-rwxr-xr-x 1 kiwamu kiwamu 51444 Dec 10 21:32 Samp_PingPong_PingPong_JN5164_0_1_4.bin*

Write to the flash

Connect TWE-Lite to your PC using USB cable, and push PRG button and RST button, and release RST, and release PRG. And run following commands.

$ ls -l /dev/ttyUSB0
crw-rw---- 1 root dialout 188, 0 Dec 11 19:58 /dev/ttyUSB0
$ cd toconet-ats/demo/Samp_PingPong/PingPong/Build
$ make write
/home/kiwamu/src/TWESDK/Tools/jenprog/jenprog_1_3/jenprog.py -t /dev/ttyUSB0 -s
*** jenprog ver 1.3 ***
  flash   : JN516x Internal Flash
  chip id : 0x10008686
  mac addr: 0x001bc50121000dc8
/home/kiwamu/src/TWESDK/Tools/jenprog/jenprog_1_3/jenprog.py -t /dev/ttyUSB0 -v Samp_PingPong_PingPong_JN5164_0_1_4.bin
*** jenprog ver 1.3 ***
 file info: 04 03 0008
writing...
  0%..10%..20%..30%..40%..50%..60%..70%..80%..90%..done - 30.05 kb/s
done
verifying...
  0%..10%..20%..30%..40%..50%..60%..70%..80%..90%..: 57.91 kb/s

OK: firmware is successfully programmed.

How to debug using gdb

T.B.D.