[DATALAD RUNCMD] make generate

=== Do not change lines below ===
{
 "chain": [
  "064735c5c6a523b311ad8fcaf8ecc7b806458cb9",
  "fc6c253973517f3da44f67ad04e07105ebaefb57",
  "677cb2bd1c59ae536d87ff114cac2dfebb54fde3"
 ],
 "cmd": "make generate",
 "dsid": "6b923cfa-a6c6-4bae-941d-e92f6afd5fcb",
 "exit": 0,
 "extra_inputs": [],
 "inputs": [
  "scripts/generate",
  "templates/"
 ],
 "outputs": [
  "README.md",
  ".github/workflows/"
 ],
 "pwd": "."
}
^^^ Do not change lines above ^^^

.github/workflows/test-datalad_catalog-maint.yaml

@@ -62,10 +62,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.8
+    - name: Set up Python 3.9
       uses: actions/setup-python@v4
       with:
-        python-version: 3.8
+        python-version: 3.9
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_catalog-master.yaml

@@ -58,10 +58,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.8
+    - name: Set up Python 3.9
       uses: actions/setup-python@v4
       with:
-        python-version: 3.8
+        python-version: 3.9
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_container-maint.yaml

@@ -62,10 +62,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.8
+    - name: Set up Python 3.9
       uses: actions/setup-python@v4
       with:
-        python-version: 3.8
+        python-version: 3.9
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_container-master.yaml

@@ -58,10 +58,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.8
+    - name: Set up Python 3.9
       uses: actions/setup-python@v4
       with:
-        python-version: 3.8
+        python-version: 3.9
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_crawler-maint.yaml

@@ -62,10 +62,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.8
+    - name: Set up Python 3.9
       uses: actions/setup-python@v4
       with:
-        python-version: 3.8
+        python-version: 3.9
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_crawler-master.yaml

@@ -58,10 +58,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.8
+    - name: Set up Python 3.9
       uses: actions/setup-python@v4
       with:
-        python-version: 3.8
+        python-version: 3.9
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_dataverse-maint.yaml

@@ -62,10 +62,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.8
+    - name: Set up Python 3.9
       uses: actions/setup-python@v4
       with:
-        python-version: 3.8
+        python-version: 3.9
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_dataverse-master.yaml

@@ -58,10 +58,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.8
+    - name: Set up Python 3.9
       uses: actions/setup-python@v4
       with:
-        python-version: 3.8
+        python-version: 3.9
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_deprecated-maint.yaml

@@ -62,10 +62,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.8
+    - name: Set up Python 3.9
       uses: actions/setup-python@v4
       with:
-        python-version: 3.8
+        python-version: 3.9
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_deprecated-master.yaml

@@ -58,10 +58,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.8
+    - name: Set up Python 3.9
       uses: actions/setup-python@v4
       with:
-        python-version: 3.8
+        python-version: 3.9
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_fuse-maint.yaml

@@ -62,10 +62,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.8
+    - name: Set up Python 3.9
       uses: actions/setup-python@v4
       with:
-        python-version: 3.8
+        python-version: 3.9
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_fuse-master.yaml

@@ -58,10 +58,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.8
+    - name: Set up Python 3.9
       uses: actions/setup-python@v4
       with:
-        python-version: 3.8
+        python-version: 3.9
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_metalad-maint.yaml

@@ -62,10 +62,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.8
+    - name: Set up Python 3.9
       uses: actions/setup-python@v4
       with:
-        python-version: 3.8
+        python-version: 3.9
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_metalad-master.yaml

@@ -58,10 +58,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.8
+    - name: Set up Python 3.9
       uses: actions/setup-python@v4
       with:
-        python-version: 3.8
+        python-version: 3.9
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_neuroimaging-maint.yaml

@@ -62,10 +62,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.8
+    - name: Set up Python 3.9
       uses: actions/setup-python@v4
       with:
-        python-version: 3.8
+        python-version: 3.9
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_neuroimaging-master.yaml

@@ -58,10 +58,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.8
+    - name: Set up Python 3.9
       uses: actions/setup-python@v4
       with:
-        python-version: 3.8
+        python-version: 3.9
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_next-maint.yaml

@@ -62,10 +62,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.8
+    - name: Set up Python 3.9
       uses: actions/setup-python@v4
       with:
-        python-version: 3.8
+        python-version: 3.9
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_next-master.yaml

@@ -58,10 +58,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.8
+    - name: Set up Python 3.9
       uses: actions/setup-python@v4
       with:
-        python-version: 3.8
+        python-version: 3.9
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_osf-maint.yaml

@@ -62,10 +62,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.8
+    - name: Set up Python 3.9
       uses: actions/setup-python@v4
       with:
-        python-version: 3.8
+        python-version: 3.9
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_osf-master.yaml

@@ -58,10 +58,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.8
+    - name: Set up Python 3.9
       uses: actions/setup-python@v4
       with:
-        python-version: 3.8
+        python-version: 3.9
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_ukbiobank-maint.yaml

@@ -62,10 +62,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.8
+    - name: Set up Python 3.9
       uses: actions/setup-python@v4
       with:
-        python-version: 3.8
+        python-version: 3.9
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_ukbiobank-master.yaml

@@ -58,10 +58,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.8
+    - name: Set up Python 3.9
       uses: actions/setup-python@v4
       with:
-        python-version: 3.8
+        python-version: 3.9
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_xnat-maint.yaml

@@ -62,10 +62,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.8
+    - name: Set up Python 3.9
       uses: actions/setup-python@v4
       with:
-        python-version: 3.8
+        python-version: 3.9
     - name: Install DataLad (maint)
       run: |
         python -m pip install --upgrade pip

.github/workflows/test-datalad_xnat-master.yaml

@@ -58,10 +58,10 @@ jobs:
       run: |
         git config --global user.email "[email protected]"
         git config --global user.name "GitHub Almighty"
-    - name: Set up Python 3.8
+    - name: Set up Python 3.9
       uses: actions/setup-python@v4
       with:
-        python-version: 3.8
+        python-version: 3.9
     - name: Install DataLad (master)
       run: |
         python -m pip install --upgrade pip