Skip to content

Latest commit

 

History

History
531 lines (441 loc) · 35.7 KB

CHANGELOG.md

File metadata and controls

531 lines (441 loc) · 35.7 KB
Raw

Changelog

1.44.1

  • Bug - Fixes a bug where ENI is attached before Agent starts and there is a delay in acknowledgement of ENI attachment by Agent #2581
  • Bug - Fixes a deadlock scenario when the agent restores the state from its data file and the tasks are using environment files feature #2580
  • Bug - Fixed a bug that can cause stats endpoint to return empty response to container that just starts up #2578
  • Bug - Fixed a bug where parsing logic from env var parsing was introducing error depending on the value #2573

1.44.0

  • Feature - Add support for customers to configure the destination for the Agent container logs, by setting a Docker-supported logging driver in the Agent config file - #2548
  • Enhancement - Agent's internal state management mechanism is changed from a custom json state file to boltdb. This change is made to reduce its resource consumption especially under high task density/mutation rate - #2562

1.43.0

  • Feature - Collect network stats for awsvpc network mode and display network rate stats for bridge and awsvpc network mode through v4 metadata endpoint - #2545

1.42.0

  • Feature - Support for sub second precision in FluentD #2538.
  • Bug - Fixed a bug that caused configured values for ImageCleanupExclusionList to be ignored in some situations #2513

1.41.1

  • Bug - Fixed a bug #2476 where HostPort is not present in ECS Task Metadata Endpoint response with bridge network type #2495

1.41.0

  • Feature - Add inferentia support #2458
  • Bug - fixes a bug where env file feature would not accept "=", which is the delimiter in the values of a env var #2487

1.40.0

  • Enhancement - Agent's default stats gathering is changing from docker streaming stats to polling. This should not affect the metrics that customers ultimately see in cloudwatch, but it does affect how the agent gathers the underlying metrics from docker. This change was made for considerable performance gains. Customers with high CPU loads may see their cluster utilization increase; this is a good thing because it means the containers are utilizing more of the cluster, and agent/dockerd/containerd are utilizing less #2452
  • Enhancement - Adds a jitter to this so that we don't query docker for every container's state all at the same time #2444
  • Bug - Register custom logger before it gets used to ensure that the formatter is initiated before it is loaded #2438

1.39.0

  • Feature - Add support for bulk loading env vars through environmentFiles field in task definition #2420
  • Feature - Add v4 task metadata endpoint, which includes additional network information compared to v3 #2396
  • Bug - Fixed an edge case that can cause task failed to start when using container ordering success condition #2404.

1.38.0

  • Feature - add integration with EFS's access point and IAM authorization features; support EFS volume for task in awsvpc network mode
  • Enhancement - adding Runtime ID of container to agent logs #2399

1.37.0

  • Feature - additional parameters allowed when specifying secretsmanager secret #2358
  • Bug - fixed a bug where Firelens container could not use config file from S3 bucket in us-east-1 #2356

1.36.2

  • Bug - fix windows logfile writing #2347
  • Bug - update sbin mount point to avoid conflict with Docker >= 19.03.5 #2345

1.36.1

  • Bug - Fixed potential file descriptor leak with context logger #2337

1.36.0

  • Feature - structured logs and logfile rollover features #2311, #2319, #2330

1.35.0

  • Feature - EFS Preview #2301
  • Bug - Load pause container for use by PID/IPC even if task networking is disabled #2300
  • Bug - Fixed a race condition that might cause the agent to crash during container creation #2299

1.34.0

  • Feature - Add Windows gMSA (group Managed Service Account) support on ECS.
  • Bug - Binding metadata directory in Z mode for selinux enabled docker, which enables read access to the metadata files from container processes. #2273

1.33.0

  • Feature - Agent performs a sync between task state on the instance and on the backend everytime Agent establishes a connection with the backend. This ensures that task state is as expected on the instance after the instance reconnects with the instance after a disconnection #2191
  • Enhancement - Update Docker LoadImage API timeout based on benchmarking test #2269
  • Enhancement - Enable the detection of health status of ECS Agent using HEALTHCHECK directive #2260
  • Enhancement - Add NON_ECS_IMAGE_MINIMUM_CLEANUP_AGE flag which when set allows the user to set the minimum time interval between when a non ECS image is created and when it can be considered for automated image cleanup #2251

1.32.1

  • Enhancement - Add ECS_ENABLE_MEMORY_UNBOUNDED_WINDOWS_WORKAROUND flag which when set ignores the memory reservation parameter along with memory bounded tasks in windows @julienduchesne #2239
  • Bug - Fixed a bug when config attribute in hostConfig is nil when starting a task #2249
  • Bug - Fixed a bug where start container failed with EOF and container is started anyways #2245
  • Bug - Fixed a bug where incorrect error type was detected when the vpc-id could not be detected on ec2-classic #2243
  • Bug - Fixed a bug where Agent did not reopen Docker event stream when it gets EOF/UnexpectedEOF error #2240

1.32.0

  • Feature - Add support for automatic spot instance draining #2205
  • Bug - Fixed a bug where the agent might crash if it's restarted right after launching a task in awsvpc network mode #2219

1.31.0

  • Feature - Add support for showing container's ImageDigest Pulled from ECR in ECS DescribeTasks #2201
  • Enhancement - Add more functionalities to firelens (log router) feature: allow including external config from s3 and local file; add fluent logger support for bridge and awsvpc network mode; add health check support for aws-for-fluent-bit image
  • Enhancement - Add support for Windows Named Pipes in volumes @ericdalling #2185

1.30.0

  • Feature - Add log router support (beta)
  • Feature - Add elastic inference support
  • Feature - Add support for showing container's Docker ID in ECS DescribeTasks and StopTask APIs #2138

1.29.1

  • Enhancement - Update task cleanup wait logic to clean task resources immediately instead of waiting 3 hours #2084
  • Bug - Fixed Agent reporting incorrect capabilities on Windows #2070
  • Bug - Fixed a bug where Agent fails to invoke IPAM DEL command when cleaning up AWSVPC task #2085
  • Bug - Fixed a bug where task resource unmarshal error was ignored rather than returned #2098
  • Bug - Update amazon-vpc-plugins that allows AWSVPCTrunking to work without ec2-net-utils #2093

1.29.0

  • Feature - Adds container network and storage metrics as part of ongoing work #2072

1.28.1

  • Enhancement - Non-ECS images cleanup: clean up dangling images with image ID #2023
  • Bug - Pick up latest version of amazon-vpc-cni-plugins and amazon-ecs-cni-plugins to include recent bug fixes (f09fd7c, d90eebe, 06cbba2)
  • Bug - Fixed error detection case when image that is being deleted does not exist @bendavies #2008
  • Bug - Fixed a bug where docker volume deletion resulted in nullpointer #2059

1.28.0

  • Feature - Introduce high density awsvpc tasks support
  • Enhancement - Introduce ECS_CGROUP_CPU_PERIOD to make cgroup cpu period configurable @boynux #1941
  • Enhancement - Add Private Host IPv4 address to container metadata @bencord0 #2000
  • Enhancement - Set terminal reason for volume task resource #2004
  • Bug - Fixed a bug where container health status is not updated when container status isn't changed #1972
  • Bug - Fixed a bug where containers in 'dead' or 'created' status are not cleaned up by the agent #2015

1.27.0

  • Feature - Add secret support for log drivers

1.26.1

  • Enhancement - Set up pause container user the same as proxy container when App Mesh enabled and pause container not using default image
  • Bug - Fixed a bug where network stats are not presented in container stats #1932

1.26.0

  • Feature - Startup order can now be explicitly set via DependsOn field in the Task Definition #1904
  • Feature - Containers in a task can now have individual start and stop timeouts #1904
  • Feature - AWS App Mesh CNI plugin support #1898
  • Enhancement - Containers with links and volumes defined will now shutdown in the correct order #1904
  • Bug - Image cleanup errors fixed #1897

1.25.3

  • Bug - Fixed a bug where agent no longer redirected malformed credentials or metadata http requests #1844
  • Bug - Populate v3 metadata networks response for non-awsvpc tasks #1833
  • Bug - Avoid image pull behavior type check for container namespaces pause image #1840

1.25.2

  • Bug - Update pull image retry to longer interval to mitigate being throttled by ECR #1808

1.25.1

  • Bug - Update ecr models for private link support

1.25.0

  • Feature - Add Nvidia GPU support for p2 and p3 instances
  • Feature - Introduce ECS_DISABLE_DOCKER_HEALTH_CHECK to make docker health check configurable #1624

1.24.0

  • Feature - Configurable poll duration for container stats @jcbowman #1646
  • Feature - Add support to remove containers and images that are not part of ECS tasks #1752
  • Feature - Introduce prometheus support for agent metrics #1745
  • Feature - Add Host EC2 instance Public IPv4 address to container metadata file #1730
  • Enhancement - Docker SDK migration replacing go-dockerclient #1743
  • Enhancement - Propagating Container Instance and Task Tags to Task Metadata endpoint #1720

1.23.0

  • Feature - Add support for ECS Secrets integrating with AWS Secrets Manager #1713
  • Enhancement - Add availability zone to task metadata endpoint #1674
  • Enhancement - Add availability zone to ECS metadata file #1675
  • Bug - Fixed a bug where agent can register container instance back to back and gets assigned two container instance ARNs #1711
  • Bug - Fixed a bug where propagated aws: tags are passed through RegisterContainerInstance API call #1706

1.22.0

  • Feature - Add support for ECS Secrets integrating with AWS Systems Manager Parameter Store
  • Feature - Support for --pid, --ipc Docker run flags. #1584
  • Feature - Introduce two environment variables ECS_CONTAINER_INSTANCE_PROPAGATE_TAGS_FROM and ECS_CONTAINER_INSTANCE_TAGS to support ECS tagging #1618

1.21.0

  • Feature - Add v3 task metadata support for awsvpc, host and bridge network mode
  • Enhancement - Update the amazon-ecs-cni-plugins to 2018.10.0 #1610
  • Enhancement - Configurable image pull inactivity timeout @wattdave #1566
  • Bug - Fixed a bug where Windows drive volume couldn't be mounted #1571
  • Bug - Fixed a bug where the Agent's Windows binaries didn't use consistent naming #1573
  • Bug - Fixed a bug where a port used by WinRM service was not reserved by the Agent by default #1577

1.20.3

  • Enhancement - Deprecate support for serial docker image pull #1569
  • Enhancement - Update the amazon-ecs-cni-plugins to 2018.08.0

1.20.2

  • Enhancement - Added ECS config field ECS_SHARED_VOLUME_MATCH_FULL_CONFIG to make the volume labels and driver options comparison configurable for shared volume #1519
  • Enhancement - Added Volumes metadata as part of v1 and v2 metadata endpoints #1531
  • Bug - Fixed a bug where unrecognized task cannot be stopped #1467
  • Bug - Fixed a bug where tasks with CPU windows unbounded field set are not honored on restart due to non-persistence of PlatformFields in agent state file @julienduchesne #1480

1.20.1

  • Bug - Fixed a bug where the agent couldn't be upgraded if there are tasks that use volumes in the task definition on the instance
  • Bug - Fixed a bug where volumes driver may not work with mountpoint

1.20.0

  • Feature - Add support for Docker volume drivers, third party drivers are only supported on linux
  • Enhancement - Replace the empty container with Docker local volume
  • Enhancement - Deprecate support for Docker version older than 1.9.0 #1477
  • Bug - Fixed a bug where container marked as stopped comes back with a running status #1446

1.19.1

  • Bug - Fixed a bug where responses of introspection API break backward compatibility #1473

1.19.0

  • Feature - Private registry can be authenticated through task definition using AWS Secrets Manager #1427

1.18.0

  • Feature - Configurable container image pull behavior #1348
  • Bug - Fixed a bug where Docker Version() API never returns by adding a timeout #1363
  • Bug - Fixed a bug where tasks could get stuck waiting for execution of CNI plugin #1358
  • Bug - Fixed a bug where task cleanup could be blocked due to incorrect sentstatus #1383

1.17.3

  • Enhancement - Distinct startContainerTimeouts for windows/linux, introduce a new environment variable ECS_CONTAINER_START_TIMEOUT to make it configurable #1321
  • Enhancement - Add support for containers to inherit ENI private DNS hostnames for awsvpc tasks #1278
  • Enhancement - Expose task definition family and task definition revision in container metadata file #1295
  • Enhancement - Fail image pulls if there's inactivity during image pull progress #1290
  • Enhancement - Parallelize the container transition in the same task #1305
  • Bug - Fixed a bug where a stale websocket connection could linger #1310

1.17.2

  • Enhancement - Update the amazon-ecs-cni-plugins to 2018.02.0 #1272
  • Enhancement - Add container port mapping and ENI information in introspection API #1271

1.17.1

  • Bug - Fixed a bug that was causing a runtime panic by accessing negative index in the health check log slice #1239
  • Bug - Workaround for an issue where CPU percent was set to 1 when CPU was not set or set to zero(unbounded) in Windows #1227
  • Bug - Fixed a bug where steady state throttle limits for task metadata endpoints were too low for applications #1240

1.17.0

  • Feature - Support a HTTP endpoint for awsvpc tasks to query metadata
  • Feature - Support Docker health check
  • Bug - Fixed a bug where -version fails due to its dependency on docker client #1118
  • Bug - Persist container exit code in agent state file #1125
  • Bug - Fixed a bug where the agent could lose track of running containers when Docker APIs timeout #1217
  • Bug - Task level memory.use_hierarchy was not being set and memory limits were not being enforced #1195
  • Bug - Fixed a bug where CPU utilization wasn't correctly reported on Windows @bboerst #1219

1.16.2

  • Bug - Fixed a bug where the ticker would submit empty container state change transitions when a task is STOPPED. #1178

1.16.1

  • Bug - Fixed a bug where the agent could miss sending an ENI attachment to ECS because of address propagation delays. #1148
  • Enhancement - Upgrade the amazon-ecs-cni-plugins to 2017.10.1. #1155

1.16.0

  • Feature - Support pulling from Amazon ECR with specified IAM role in task definition
  • Feature - Enable support for task level CPU and memory constraints.
  • Feature - Enable the ECS agent to run as a Windows service. #1070
  • Enhancement - Support CloudWatch metrics for Windows. #1077
  • Enhancement - Enforce memory limits on Windows. #1069
  • Enhancement - Enforce CPU limits on Windows. #1089
  • Enhancement - Simplify task IAM credential host setup. #1105

1.15.2

  • Bug - Fixed a bug where container state information wasn't reported. #1076

1.15.1

  • Bug - Fixed a bug where container state information wasn't reported. #1067
  • Bug - Fixed a bug where a task can be blocked in creating state. #1048
  • Bug - Fixed dynamic HostPort in container metadata. #1052
  • Bug - Fixed bug on Windows where container memory limits are not enforced. #1069

1.15.0

  • Feature - Support for provisioning tasks with ENIs.
  • Feature - Support for --init Docker run flag. #996
  • Feature - Introduces container level metadata. #981
  • Enhancement - Enable 'none' logging driver capability by default. #1041
  • Bug - Fixed a bug where tasks that fail to pull containers can cause the agent to fail to restore properly after a restart. #1033
  • Bug - Fixed default logging level issue. #1016
  • Bug - Fixed a bug where unsupported Docker API client versions could be registered. #1014
  • Bug - Fixed a bug where non-essential container state changes were sometimes not submitted. #1026

1.14.5

  • Enhancement - Retry failed container image pull operations #975
  • Enhancement - Set read and write timeouts for websocket connectons #993
  • Enhancement - Add support for the SumoLogic Docker log driver plugin #992
  • Bug - Fixed a memory leak issue when submitting the task state change #967
  • Bug - Fixed a race condition where a container can be created twice when agent restarts. #939
  • Bug - Fixed an issue where microsoft/windowsservercore:latest was not pulled on Windows under certain conditions. #990
  • Bug - Fixed an issue where task IAM role credentials could be logged to disk. #998

1.14.4

  • Enhancement - Batch container state change events. #867
  • Enhancement - Improve the error message when reserved memory is larger than the available memory. #897
  • Enhancement - Allow plain HTTP connections through wsclient. #899
  • Enhancement - Support Logentries log driver by @opsline-radek. #870
  • Enhancement - Allow instance attributes to be provided from config file by @ejholmes. #908
  • Enhancement - Reduce the disconnection period to the backend for idle connections. #912
  • Bug - Fixed data race where a pointer was returned in Getter. #889
  • Bug - Reset agent state if the instance id changed on agent restart. #892
  • Bug - Fixed a situation in which containers may be falsely reported as STOPPED in the case of a Docker "stop" API failure. #910
  • Bug - Fixed typo in log string by @sharuzzaman. #930

1.14.3

  • Bug - Fixed a deadlock that was caused by the ImageCleanup and Image Pull. #836

1.14.2

  • Enhancement - Added introspection API for querying tasks by short docker ID, by @aaronwalker. #813
  • Bug - Added checks for circular task dependencies. #796
  • Bug - Fixed an issue with Docker auth configuration overrides. #751
  • Bug - Fixed a race condition in the task clean up code path. #737
  • Bug - Fixed an issue involving concurrent map writes. #743

1.14.1

  • Enhancement - Log completion of image pulls. #715
  • Enhancement - Increase start and create timeouts to improve reliability under some workloads. #696
  • Bug - Fixed a bug where throttles on state change reporting could lead to corrupted state. #705
  • Bug - Correct formatting of log messages from tcshandler. #693
  • Bug - Fixed an issue where agent could crash. #692

1.14.0

  • Feature - Support definition of custom attributes on agent registration.
  • Feature - Support Docker on Windows Server 2016.
  • Enhancement - Enable concurrent docker pull for docker version >= 1.11.1.
  • Bug - Fixes a bug where a task could be prematurely marked as stopped.
  • Bug - Fixes an issue where ECS Agent would keep reconnecting to ACS without any backoff.
  • Bug - Fix memory metric to exclude cache value.

1.13.1

  • Enhancement - Added cache for DiscoverPollEndPoint API.
  • Enhancement - Expose port 51679 so docker tasks can fetch IAM credentials.
  • Bug - fixed a bug that could lead to exhausting the open file limit.
  • Bug - Fixed a bug where images were not deleted when using image cleanup.
  • Bug - Fixed a bug where task status may be reported as pending while task is running.
  • Bug - Fixed a bug where task may have a temporary "RUNNING" state when task failed to start.
  • Bug - Fixed a bug where CPU metrics would be reported incorrectly for kernel >= 4.7.0.
  • Bug - Fixed a bug that may cause agent not report metrics.

1.13.0

  • Feature - Implemented automated image cleanup.
  • Enhancement - Add credential caching for ECR.
  • Enhancement - Add support for security-opt=no-new-privileges.
  • Bug - Fixed a potential deadlock in dockerstate.

1.12.2

  • Bug - Fixed a bug where agent keeps fetching stats of stopped containers.

1.12.1

  • Bug - Fixed a bug where agent keeps fetching stats of stopped containers.
  • Bug - Fixed a bug that could lead to exhausting the open file limit.
  • Bug - Fixed a bug where the introspection API could return the wrong response code.

1.12.0

  • Enhancement - Support Task IAM Role for containers launched with 'host' network mode.

1.11.1

  • Bug - Fixed a bug where telemetry data would fail to serialize properly.
  • Bug - Addressed an issue where telemetry would be reported after the container instance was deregistered.

1.11.0

  • Feature - Support IAM roles for tasks.
  • Feature - Add support for the Splunk logging driver.
  • Enhancement - Reduced pull status verbosity in debug mode.
  • Enhancement - Add a Docker label for ECS cluster.
  • Bug - Fixed a bug that could cause a container to be marked as STOPPED while still running on the instance.
  • Bug - Fixed a potential race condition in metrics collection.
  • Bug - Resolved a bug where some state could be retained across different container instances when launching from a snapshotted AMI.

1.10.0

  • Feature - Make the docker stop timeout configurable.
  • Enhancement - Use docker stats as the data source for CloudWatch metrics.
  • Bug - Fixed an issue where update requests would not be properly acknowledged when updates were disabled.

1.9.0

  • Feature - Add Amazon CloudWatch Logs logging driver.
  • Bug - Fixed ACS handler when acking blank message ids.
  • Bug - Fixed an issue where CPU utilization could be reported incorrectly.
  • Bug - Resolved a bug where containers would not get cleaned up in some cases.

1.8.2

  • Bug - Fixed an issue where exec_create and exec_start events were not correctly ignored with some Docker versions.
  • Bug - Fixed memory utilization computation.
  • Bug - Resolved a bug where sending a signal to a container caused the agent to treat the container as dead.

1.8.1

  • Bug - Fixed a potential deadlock in docker_task_engine.

1.8.0

  • Feature - Task cleanup wait time is now configurable.
  • Enhancement - Improved testing for HTTP handler tests.
  • Enhancement - Updated AWS SDK to v.1.0.11.
  • Bug - Fixed a race condition in a docker-task-engine test.
  • Bug - Fixed an issue where dockerID was not persisted in the case of an error.

1.7.1

  • Enhancement - Increase docker inspect timeout to improve reliability under some workloads.
  • Enhancement - Increase connect timeout for websockets to improve reliability under some workloads.
  • Bug - Fixed memory leak in telemetry ticker loop.

1.7.0

  • Feature - Add support for pulling from Amazon EC2 Container Registry.
  • Bug - Resolved an issue where containers could be incorrectly assumed stopped when an OOM event was emitted by Docker.
  • Bug - Fixed an issue where a crash could cause recently-created containers to become untracked.

1.6.0

  • Feature - Add experimental HTTP proxy support.
  • Enhancement - No longer erroneously store an archive of all logs in the container, greatly decreasing memory and CPU usage when rotating at the hour.
  • Enhancement - Increase docker create timeout to improve reliability under some workloads.
  • Bug - Resolved an issue where private repositories required a schema in AuthData to work.
  • Bug - Fixed issue whereby metric submission could fail and never retry.

1.5.0

  • Feature - Add support for additional Docker features.
  • Feature - Detect and register capabilities.
  • Feature - Add -license flag and /license handler.
  • Enhancement - Properly handle throttling.
  • Enhancement - Make it harder to accidentally expose sensitive data.
  • Enhancement - Increased reliability in functional tests.
  • Bug - Fixed potential divide-by-zero error with metrics.

1.4.0

  • Feature - Telemetry reporting for Services and Clusters.
  • Bug - Fixed an issue where some network errors would cause a panic.

1.3.1

  • Feature - Add debug handler for SIGUSR1.
  • Enhancement - Trim untrusted cert from CA bundle.
  • Enhancement - Add retries to EC2 Metadata fetches.
  • Enhancement - Logging improvements.
  • Bug - Resolved an issue with ACS heartbeats.
  • Bug - Fixed memory leak in ACS payload handler.
  • Bug - Fixed multiple deadlocks.

1.3.0

  • Feature - Add support for re-registering a container instance.

1.2.1

  • Security issue - Avoid logging configured AuthData at the debug level on startup
  • Feature - Add configuration option for reserving memory from the ECS Agent

1.2.0

  • Feature - UDP support for port bindings.
  • Feature - Set labels on launched containers with task-arn, container-name, task-definition-family, and task-definition-revision.
  • Enhancement - Logging improvements.
  • Bug - Improved the behavior when CPU shares in a Container Definition are set to 0.
  • Bug - Fixed an issue where BindIP could be reported incorrectly.
  • Bug - Resolved an issue computing API endpoint when region is provided.
  • Bug - Fixed an issue where not specifiying a tag would pull all image tags.
  • Bug - Resolved an issue where some logs would not flush on exit.
  • Bug - Resolved an issue where some instance identity documents would fail to parse.

1.1.0

  • Feature - Logs rotate hourly and log file names are suffixed with timestamp.
  • Enhancement - Improve error messages for containers (visible as 'reason' in describe calls).
  • Enhancement - Be more permissive in configuration regarding whitespace.
  • Enhancement - Docker 1.6 support.
  • Bug - Resolve an issue where data-volume containers could result in containers stuck in PENDING.
  • Bug - Fixed an issue where unknown images resulted in containers stuck in PENDING.
  • Bug - Correctly sequence task changes to avoid resource contention. For example, stopping and starting a container using a host port should work reliably now.

1.0.0

  • Feature - Added the ability to update via ACS when running under amazon-ecs-init.
  • Feature - Added version information (available via the version flag or the introspection API).
  • Enhancement - Clarified reporting of task state in introspection API.
  • Bug - Fix a lock scoping issue that could cause an invalid checkpoint file to be written.
  • Bug - Correctly recognize various fatal messages from ACS to error out more cleanly.

0.0.3 (2015-02-19)

  • Feature - Volume support for 'host' and 'empty' volumes.
  • Feature - Support for specifying 'VolumesFrom' other containers within a task.
  • Feature - Checkpoint state, including ContainerInstance and running tasks, to disk so that agent restarts do not leave dangling containers.
  • Feature - Add a "/tasks" endpoint to the introspection API.
  • Feature - Add basic support for DockerAuth.
  • Feature - Remove stopped ECS containers after a few hours.
  • Feature - Send a "reason" string for some of the errors that might occur while running a container.
  • Bug - Resolve several issues where a container would remain stuck in PENDING.
  • Bug - Correctly set 'EntryPoint' for containers when configured.
  • Bug - Fix an issue where exit codes would not be sent properly.
  • Bug - Fix an issue where containers with multiple ports EXPOSEd, but not all forwarded, would not start.

0.0.2 (2014-12-17)

  • Bug - Worked around an issue preventing some tasks to start due to devicemapper issues.